tungsten carbide strip and sheet

  • carbide strips
  • carbide strips
  • carbide strips
  • carbide strips

Tungsten carbide strip and sheet has the characteristics of high red-hardness, good weldability, high hardness and good wear resistance, it is mainly used for machining the solid wood, density board, grey cast iron, non-ferrous metal materials, chilled cast iron, quenched steel, PCB, braking materials. When used, should according to the specific purpose to choose the right material of tungsten carbide strip and sheet.

Tungsten carbide strip and sheet

Appellation: Tungsten carbide strip and sheet
Main Materials: Tungsten carbide
Service: Processing with supplied drawings or samples, customize grade.
OEM: OEM is available
Brands: GUBT
Logo: GUBT or as customer request
Color: Primary or as customer request

Technological process of production: powder process → formula according to the use requirements → wet grinding → mixing → smash → dry → sieving → add binder → dry again → get the mixture after sieving → pelletize → pressing → forming → sinter-hip → forming (blank)→ flaw detection → packaging → entering warehouse.

Tungsten carbide strip and sheet has the characteristics of high red-hardness, good weldability, high hardness and good wear resistance, it is mainly used for machining the solid wood, density board, grey cast iron, non-ferrous metal materials, chilled cast iron, quenched steel, PCB, braking materials. 

When used, should according to the specific purpose to choose the right material of tungsten carbide strip and sheet.

The following are five advantages of our tungsten carbide strip and sheet:

  1. The purity of raw material is more than 99.95%, the impurity content is very few, so the physical performance of our tungsten carbide strip and sheet is stable.
  2. The density of our tungsten carbide strip and sheet is uniform, we use 300 Mpa isostatic pressing machine, effectively eliminate defects, the density of tungsten carbide strip and sheet is more uniform.
  3. We use the spray drying technology, the material under the conditions of the whole seal and protected by high purity nitrogen, so it effectively reduce the possibility of increasing oxygen in the process of mixing material.
  4. We use deep cold treatment technology, to improve its microstructure, greatly remove their internal stress, avoid come into being cracks in the cutting molding process.
  5. We use HIP-Sinter technology, to effectively eliminate the pores in the tungsten carbide strip and sheet, so the product quality is stable.

connected to “carbide woodworking blades”

drawing of tungsten carbide strip and sheet

型号Type T +0.5 W +0.6 L +1.0
+0.2 +0.3 0
2×50×170 2 50 170
3×50×170 3 50 170
3.2×50×170 3.2 50 170
3.5×50×170 3.5 50 170
3.8×50×170 3.8 50 170
4×50×170 4 50 170
2×70×170 2 70 170
3×70×170 3 70 170
3.2×70×170 3.2 70 170
3.5×70×170 3.5 70 170
3.8×70×170 3.8 70 170
4×70×170 4 70 170
2×80×170 2 80 170
3×80×170 3 80 170
3.2×80×170 3.2 80 170
3.5×80×170 3.5 80 170
3.8×80×170 3.8 80 170
4×80×170 4 80 170
 
3×8×310 3 8 310
3.2×8×310 3.2 8 310
3.5×8×310 3.5 8 310
3.8×8×310 3.8 8 310
4×8×310 4 8 310
2×10×310 2 10 310
3×10×310 3 10 310
3.2×10×310 3.2 10 310
3.5×10×310 3.5 10 310
3.8×10×310 3.8 10 310
4×10×310 4 10 310
2×12×310 2 12 310
3×12×310 3 12 310
3.2×12×310 3.2 12 310
3.5×12×310 3.5 12 310
3.8×12×310 3.8 12 310
4×12×310 4 12 310
2×15×310 2 15 310
3×15×310 3 15 310
3.2×15×310 3.2 15 310
3.5×15×310 3.5 15 310
3.8×15×310 3.8 15 310
4×15×310 4 15 310
2×18×310 2 18 310
3×18×310 3 18 310
3.2×18×310 3.2 18 310
3.5×18×310 3.5 18 310
3.8×18×310 3.8 18 310
4×18×310 4 18 310
2×20×310 2 20 310
3×20×310 3 20 310
3.2×20×310 3.2 20 310
3.5×20×310 3.5 20 310
3.8×20×310 3.8 20 310
4×20×310 4 20 310
3×22×310 3 22 310
3.2×22×310 3.2 22 310
3.5×22×310 3.5 22 310
3.8×22×310 3.8 22 310
4×22×310 4 22 310
3×25×310 3 25 310
3.2×25×310 3.2 25 310
3.5×25×310 3.5 25 310
3.8×25×310 3.8 25 310
4×25×310 4 25 310
3×28×310 3 28 310
3.2×28×310 3.2 28 310
3.5×28×310 3.5 28 310
3.8×28×310 3.8 28 310
4×28×310 4 28 310
3×30×310 3 30 310
3.2×30×310 3.2 30 310
3.5×30×310 3.5 30 310
3.8×30×310 3.8 30 310
4×30×310 4 30 310
3×32×310 3 32 310
3.2×32×310 3.2 32 310
3.5×32×310 3.5 32 310
3.8×32×310 3.8 32 310
4×32×310 4 32 310
3×35×310 3 35 310
3.2×35×310 3.2 35 310
3.5×35×310 3.5 35 310
3.8×35×310 3.8 35 310
4×35×310 4 35 310
3×40×310 3 40 310
3.2×40×310 3.2 40 310
3.5×40×310 3.5 40 310
3.8×40×310 3.8 40 310
4×40×310 4 40 310
 
2×2×330 2 2 330
2×3×330 2 3 330
2×4×330 2 4 330
2×5×330 2 5 330
2×6×330 2 6 330
2×7×330 2 7 330
2×8×330 2 8 330
2×10×330 2 10 330
2×12×330 2 12 330
2×13×330 2 13 330
2×14×330 2 14 330
2×15×330 2 15 330
2×16×330 2 16 330
2×18×330 2 18 330
2×19×330 2 19 330
2×20×330 2 20 330
2×25×330 2 25 330
2.9×5.8×330 2.9 5.8 330
3×3×330 3 3 330
3×3.6×330 3 3.6 330
3×4×330 3 4 330
3×5×330 3 5 330
3×6×330 3 6 330
3×7×330 3 7 330
3×8×330 3 8 330
3×9×330 3 9 330
3×10×330 3 10 330
3×12×330 3 12 330
3×13×330 3 13 330
3×14×330 3 14 330
3×15×330 3 15 330
3×16×330 3 16 330
3×18×330 3 18 330
3×19×330 3 19 330
3×20×330 3 20 330
3×25×330 3 25 330
3×30×330 3 30 330
3×32×330 3 32 330
3.5×11×330 3.5 11 330
3.6×6×330 3.6 6 330
4×4×330 4 4 330
4×5×330 4 5 330
4×6×330 4 6 330
4×6.8×330 4 6.8 330
4×8×330 4 8 330
4×10×330 4 10 330
4×12×330 4 12 330
4×13×330 4 13 330
4×14×330 4 14 330
4×15×330 4 15 330
4×16×330 4 16 330
4×18×330 4 18 330
4×20×330 4 20 330
4×22×330 4 22 330
4×25×330 4 25 330
4×30×330 4 30 330
4×35×330 4 35 330
5×5×330 5 5 330
5×8×330 5 8 330
5×10×330 5 10 330
Grade Co% Grain Size
( μm )
Hardness
( HAR )
Density
( g/cm )
Bending Strength
( Mpa )
Elastic Modulus
( Gpa )
Thermal Coefficient Of Expansion
( 10/C )
The Range Of Application
GB6.5 6.5 1 91.5 14.8 2800 525 4.9 Suitable for machining solid wood, density board, grey cast iron, non-ferrous metal materials, etc.
GB7.0 7 1 90.5 14.8 2800 520 5 Strong applicability, suitable for machining solid wood, density board, grey cast iron, non-ferrous metal materials, etc.
GB8.0 8 1 91 14.6 3000 510 5.1 Good comprehensive properties, suitable for machining solid wood, density board, grey cast iron, chilled cast iron, stainless steel, non-ferrous metal materials, etc.
GB5.0X 5 0.6 93.5 14.9 2600 540 4.8 Ultra-fine grain, with good corrosion resistance, high hardness and high wearability, suitable to be used to manufacture with the characteristics of the corrosive medium’s bamboo wood cutter and chilled cast iron, quenched steel, PCB, braking material cutter.
GB6.0X 6 0.6 93 14.8 3000 530 4.9 Ultra-fine grain, suitable to be used to manufacture wood cutting tool with simple shape, and the cutter for chilled cast iron, quenched steel, PCB and braking material.
GB10.0X 10 0.6 92.2 14.4 3300 490 5.4 Ultra-fine grain with excellent comprehensive performance, good wear resistance and weldability, suitable for rough machining or finish machining solid wood, density board, particle board and other wood, hardened steel of chilled cast iron, PCB, fiber reinforced materials.
GB9.0CX 9 0.5 93.6 14.5 4000 510 5.3 Ultra-fine grain, good red-hardness, suitable for machining high speed steel, tool and mould steel, chilled cast iron, glass fiber and particle board and stainless steel.
GB6.0TX 6 0.6 93 14.9 3200 530 4.9 Ultra-fine grain, high hardness, good wearability,suitable to be used to manufacture wood cutting tool.

 

Your Name (required)

Your Email (required)

Subject

Your Message

captcha

One Response to tungsten carbide strip and sheet

[top]

Leave a Reply

Your email address will not be published. Required fields are marked *